EN
PerfectPower
General safety instructions
7
2.2
Safety when installing the device
!
WARNING!
•
Never connect more than
one
consumer device to the inverter. If you
connect more than one device, a short circuit may occur.
!
CAUTION!
•
Ensure the device is standing firmly.
The device must be set up and fastened in such a way that it cannot tip
over or fall down.
•
Take the precautions necessary to ensure that children cannot inter-
fere with operation. Dangerous situations may occur which cannot be
recognised by children!
•
Do not expose the device to a heat source (such as direct sunlight or
heating). Avoid additional heating of the device in this way.
Electrical cables
•
If cables have to be fed through metal walls or other walls with sharp
edges, use ducts or wire bushings to prevent damage.
•
Do not lay cables which are loose or bent next to electrically conduc-
tive material (metal).
•
Do not pull on the cables.
•
Do not lay the 230 V mains cable and the 24 V DC cable in the same
duct.
•
Fasten the cables securely.
•
Lay the cables so that they cannot be tripped over or damaged.
PP604--IO-EN-ZH.book Seite 7 Donnerstag, 2. November 2017 11:41 11
Содержание PERFECTPOWER PP604
Страница 2: ...PP604 IO EN ZH book Seite 2 Donnerstag 2 November 2017 11 41 11...
Страница 16: ...ZH PerfectPower 16 1 A I 2 2 1 2 2 PP604 IO EN ZH book Seite 16 Donnerstag 2 November 2017 11 41 11...
Страница 22: ...ZH PerfectPower 22 10 11 12 M 21 5 V PP604 IO EN ZH book Seite 22 Donnerstag 2 November 2017 11 41 11...