EN
Midi Heki Style 400 x 700
Installing the Midi Heki Style
9
Making a final check
➤
Check visually whether the seal all round the outer frame is against the
roof surface and the mounting supports are aligned.
➤
Tighten the screws about 10 minutes after installation.
See fig.
a
A
➤
Press the inner frame into the groove (
1
) on the mounting supports.
➤
After installing, check the roof light works properly.
➤
Remove the protective film from both sides of the acrylic glass.
I
➤
If necessary, enter the new vehicle height and weight in the vehicle doc-
uments.
NOTICE!
Hold the hand crank in the closed position when placing the inner
frame on the outer frame, otherwise the position of the hand crank
(
2
) will be misaligned with the hexagon part (
3
).
NOTE
If the protective film is exposed to sunlight for too long, it cannot
be taken off without leaving a residue.
Содержание Midi Heki Style 400 x 700
Страница 4: ......