EN
Installing the Midi Heki Style
Midi Heki Style 400 x 700
8
See fig.
8
A
➤
Seal the mounting frame with a flexible non-hardening butyl sealing com-
pound (e.g. Sika Lastomer-710).
See fig.
9
➤
Check the direction of travel when installing (hinge-side at front in direc-
tion of travel).
➤
Place the outer frame in the middle of the roof opening.
➤
Press the outer frame in the roof slightly so that the packing compound
spreads out.
See fig.
0
➤
Place the 10 mounting supports on the inside of the vehicle all the way
into the recess of the outer frame.
If you use wooden rails as reinforcement
A
➤
Pre-drill two 2.2 mm holes for each mounting support in the roof construc-
tion (
A
).
➤
Fix the mounting supports on the roof with the
∅
3.5 mm screws
included (
B
).
For other constructions, suitable screws must be used (not in scope of
delivery).
➤
Fix the 10 mounting supports with the
∅
4 mm fixing screws to the outer
frame (
C
).
To do this use the large holes in the mounting supports.
NOTICE!
Observe the sealant manufacturer’s instructions.
NOTICE!
Do not drill through the roof construction.
Содержание Midi Heki Style 400 x 700
Страница 4: ......