EN
General safety instructions
MCA1215, MCA1225, MCA1235
6
!
WARNING!
•
Always use sockets which are grounded and secured by residual
current circuit breakers.
•
Make sure that the lead has a sufficient cross-section.
•
Lay the cables so that they cannot be damaged by the doors or the
bonnet.
Crushed cables can lead to serious injury.
!
CAUTION!
•
Lay the cables so that they cannot be tripped over or damaged.
A
NOTICE!
•
Use ductwork or cable ducts if it is necessary to lay cables through
metal panels or other panels with sharp edges.
•
Do
not
lay the 230 V mains cable and the 12 V DC cable in the same
duct.
•
Do
not
lay the cable so that it is loose or heavily kinked.
•
Fasten the cables securely.
•
Do not pull on the cables.
2.4
Operating the device safely
D
DANGER! Danger of electrocution
•
Do not touch exposed cables with your bare hands. This applies espe-
cially when operating the device from the AC mains.
•
To be able to disconnect the device quickly from the mains, the socket
must be close to the device and be easily accessible.
!
WARNING!
•
Only use the device in closed, well-ventilated rooms.
•
Do
not
operate the device in systems with lead acid batteries. These
batteries give off explosive hydrogen gas that can be ignited by sparks
on electrical connections.
MCA1215-1235--IO--AU.book Seite 6 Donnerstag, 13. Oktober 2016 10:37 10
