EN
MCA1215, MCA1225, MCA1235
Using the device
25
–
Set for optimal charging voltage controlled by external sensor:
–
To activate sleep mode:
9
Using the device
➤
Set the On/off switch to “On”.
To switch off the device set the On/off switch to “On”.
✓
Depending on the charging condition of the battery, the battery charger starts
charging or supplies a retention voltage.
✓
The “Status” LED (fig.
1
5, page 11) displays the operating status (see following
table and chapter “Battery charging function” on page 13).
I
Switch 1
Switch 2
Switch 3
ON
ON
ON
Switch 4
ON
Display
Meaning
Orange, quickly flashing
Phase 1
Orange, slowly flashing
Phase 2
Orange, constantly lit
Phase 3
Green, constantly lit
Phase 4
Green, slowly flashing
Phase 5
Red, constantly lit
Short circuit or defective fuse
Red, quickly flashing
Battery or battery charger is overheating
Red, slowly flashing
Battery undervoltage or overload
Red, double flash
Fan fault
Red, slow double flash
Fault at the starter battery connection
NOTE
In the event of a fault (the Status LED is red), refer to chapter “Trouble-
shooting” on page 27).
MCA1215-1235--IO--AU.book Seite 25 Donnerstag, 13. Oktober 2016 10:37 10
