6
EN
Specifications
Macerator Toilet
B
A
4
Dometic flush switch panel (fig . 4)
Ref .
Dimension
A
3.25 in. / 83 mm
B
1.625 in. / 41 mm
4 .2 Materials
•
Toilet:
vitreous ceramic
•
Toilet base:
polypropylene
•
Dometic flush switch panel:
polystyrene (DFS-1F
or DFS-2F); or powder-coated aluminum (DFST)
4 .3 Minimum System Requirements
Electrical
Power draw
20 amps/12 V DC;
10 amps/24 V DC
Circuit breaker
25 amps/12 V DC;
15 amps/24 V DC
Wiring
12 ga. (up to 25 ft./7.6 m
total circuit)
Consult ABYC guidelines
for additional information.
Water
Supply
Fitting size
Supply hose ID
0.5 in. NPT – fresh water
flush toilet
0.75 in. ID – sea water flush
toilet
Flow rate
2.0 gpm/7.6 lpm
minimum – fresh water
flush
Discharge
Inside diameter
1.5 in./38 mm or
1 in./25 mm
Horizontal run*
40 ft./12.2 m maximum
Vertical run*
4 ft./1.2 m maximum
*
Horizontal and vertical run distances are not
cumulative. Check for adequate discharge flow if
installation nears one of these limits.
I
Specifications are subject to change without
notice.
