VENTILATION KIT
(Part Nummer: 241 2985-00)
17
9.0
Connect the cable to a
permanent attached
12V DC power supply
with the right polarity
(mount an additional
switch if wanted).
The cable must be laid in such a way that it does not come in
contact with hot components of the unit/burner or with sharp
edges.
CONTENTS
Reinforcing plate with doublesided
adhesive tape
Metal holder for ventilator
12V-DC-ventilator
Bimetal-switch with connection cable
The Bimetal-switch is clicked onto the
condenser pipe, as shown.
Mount ventilator with holder and two
screws between condenser and absorb-
tion unit.
(Use reinforcing plate at appli-
ances with no metal rear!).
IMPORTANT!
The ventilator has to be
installed with the same slope like the
condenser fins. By this the generated air
stream is always lead in an upper direc-
tion.
Installing an additional fan is useful, if due to unfavourable built−in conditions
and / or constantly high ambient temperature the ventilation of the cooling unit
is affected, and there is worsening of cooling performance.
Fan
