AU
Installation
IBIS4
12
See fig.
7
➤
Before installation, check whether the roof hole needs reinforcing.
➤
If needed, remove the foam according to the width of your reinforcing rails
(not in scope of delivery) (
A
).
➤
Fit the reinforcing rails (
B
).
➤
If needed, fit a suitable H-frame to provide reinforcement to the roof.
8.3
Installing in an existing opening
I
NOTE
•
Existing roof hatch openings in accordance with fig.
8
are suitable for
installing the roof air conditioner.
•
Dispose of all waste material, glue, silicone and seals separately. Observe
the disposal guidelines.
•
The manufacturer only assumes liability for parts included in the scope of
delivery. The validity of the warranty expires if the device is installed
together with third-party parts.
7
A
B
2.
1.
IBIS4-A4--I.book Seite 12 Mittwoch, 13. März 2019 9:43 21
