2.
1.
A
B
Operating manual
This device is suitable for use as a mains adapter for thermoelectric coolboxes and other devices with 12 V
g
operating voltage with a maximum power consumption of 72 W.
The device is not suitable for compressor coolboxes.
Safety instructions
•
Electronic devices are not toys!
Always keep and use the device well out of the reach of children.
•
Check that the voltage specification on the type plate corresponds to that of the energy supply.
•
If the cable is damaged, it must be replaced to prevent possible electrical hazards.
•
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
•
Do not operate the device near flames or other heat sources (heating, direct sunlight, gas ovens etc.).
•
Never immerse the device in water.
•
Protect the device and the cable against heat and moisture (e.g. rain).
•
The socket-outlet shall be installed near the equipment and the connection shall be easily accessible.
•
The AC plug is used as a disconnect device when need to power off this equipment.
•
Ensure that the ventilation slots are not covered.
•
This device may only be repaired by qualified personnel. Inadequate repairs can lead to considerable hazards.
Should your device need to be repaired, please contact customer service.
Troubleshooting
If no output voltage is present, the fuse may be broken.
Screw out the fuse insert (
A
) and replace the defective fuse with a spare fuse (
B
).
Technical data
EPS817
Input voltage:
220 – 240 V/ 50 Hz
Current consumption:
0,6 A
Output voltage:
12 to 13 V
g
Constant operation limit:
6 A
Output power at 12 V
g
:
72 W
Fuse:
T630 mA 250V
EN
EPS817_OPM-APAC(en).fm Seite 2 Freitag, 10. Mai 2019 1:52 13
