Dometic DW 2440, Инструкция

Страница: 13 / 32

- 13 -
The salt container and rinse aid dispenser shall be filled in accordance with this instruction manual.
Before conducting the measurements the dishwasher shall be operated for one or two complete cycles using
detergent and a clean load.
Test standard: EN 50242 and EN 60704
Rated capacity: 6 place settings accordance EN 50242
Loading of basket: loading according to figure below
Test program: energy saving 55° C
Detergent (IEC type B): 9 gram in the dis 5 gram in the pre-wash dispenser
Rinse aid (type III): setting 3
Feed water pressure: minimum 0,8 bar, maximum 10 bar
Waste water outlet: install according to figure below
Information for test centres
Installation instructions
Any electrical work required to install this
appliance, should be carried out by a qualified
electrician or competent person. Any plumbing work required to install this
appliance, should be carried out by a qualified
plumber or competent person.
Technical specifications
Capacity:
6 place settings accordance EN 50242
Dimensions: Height 447 mm
Width 546 mm
Depth (to the edge of the door) 480 mm
Depth (to the middle of the door) 490 mm
Weight:
Net 22 kg
Water pressures:
Minimum 80 kPa (0,8 bar)
Maximum 1000 kPa (10 bar)
Water temperature: Maximum 65° C
Electrical data: Power supply 230 V - 50 Hz
Fuse 10 A
Heating element 1100 W
Power rating 1180 W