Dometic DSP212, Инструкция по установке и эксплуатации

Страница: 12 / 248

EN
General safety instructions SinePower
12
!
CAUTION!
•
Lay the cables so that they cannot be tripped over or damaged.
A
NOTICE!
•
Use ductwork or cable ducts if it is necessary to lay cables through
metal panels or other panels with sharp edges.
•
Do not lay the 230 V mains cable and the 12 V DC cable in the same
duct.
•
Do not lay the cable so that it is loose or heavily kinked.
•
Fasten the cables securely.
•
Do not pull on the cables.
2.5 Operating the device safely
D
DANGER! Danger of electrocution
•
Do not touch exposed cables with your bare hands. This applies espe-
cially when operating the device from the AC mains.
!
WARNING!
•
Only use the device in closed, well-ventilated rooms.
!
CAUTION!
•
Do
not
operate the device
– In salty, wet or damp environments
– In the vicinity of corrosive fumes
– In the vicinity of combustible materials
– In areas where there is a danger of explosions.
•
Before starting the device, ensure that the power supply line and the
plug are dry.
•
Always disconnect the power supply when working on the device.
•
Please observe that parts of the device may still conduct voltage even
if the fuse has blown.
•
Do not disconnect any cables when the device is still in use.
A
NOTICE!
•
Make sure the air inlets and outlets of the device are not covered.
•
Ensure good ventilation.
DSP200-400--IO-16s.book Seite 12 Donnerstag, 30. November 2017 8:37 08