PRECAUTIONS TO AVOID POSSIBLE
EXPOSURE TO EXCESSIVE
MICROWAVE ENERGY
(a) Do not attempt to operate this oven with the door open since open-door operation can result in
harmful exposure to microwave energy. It is important not to defeat or tamper with the safety
interlocks.
(b) Do not place any object between the oven front face and the door or allow soil or cleaner residue
to accumulate on sealing surfaces.
(c) Do not operate the oven If lt Is damaged. It Is particularly Important that the oven door close
prop
erly and that there Is no damage to the:
(1) Door (bent),
(2) Hinges and latches (broken or loosened),
(3) Door seals and sealing surfaces.
(d) The oven should not be adjusted or repaired by anyone except properly qualified service personnel.
FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE
STATEMENT (U.S.A ONLY)
WARNING :
This equipment generates and uses ISM frequency energy and if not installed and used properly, that is in
strict accordance with the manufacturers’ instructions, may cause interference to radio and television
reception.
it has been type tested and found to comply with limits for a ISM Equipment pursuant to part 18 of FCC
Rules, which are designed to provide reasonable protection against
such
interference in a residential
installation.
However, there is no guarantee that interference will not occur in particular installation.
If this equipment does cause interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the followings:
l
Reorient the receiving antenna of radio or television.
l
Relocate the microwave oven with respect to the receiver.
l
Move the microwave oven away from the receiver.
l
Plug the microwave oven into a different outlet so that microwave oven and receiver are no different
branch circuits.
THE MANUFACTURER is not responsible for any radio TV interference caused by UNAUTHORIZED
MODIFICATION to this microwave oven. It is the responsibility of the user to correct
such
interference.
-3-
