Dometic DM20D, Инструкция по установке и эксплуатации

Страница: 18 / 72

EN
Installation DM20
18
6.4 Mounting the lock (lock version only)
1. Drill a hole with a diameter of 35 mm (1.4 in.) into the decor.
2. Mount the lock together with the lock decor.
6.5 Mounting the lock (no lock version only)
Disassembling the drawer (fig.
7
, page 7)
1. Open the drawer completely.
2. Press the rail lock ( A 1 ).
3. Pull the drawer out of the cabinet.
4. Remove the gasket ( B 1 ).
5. Remove the lock cover ( B 2 ).
6. Remove the plugs ( C 1 ) from the screws of the door handle ( C 3 ).
7. Unscrew the screws ( C 2 ) of the door handle ( C 3 ).
8. Remove the door handle ( C 3 ).
Drilling the holes (fig.
8
, page 7)
1. Drill a hole with a diameter of 25 mm (0.98 in.) through the decor and the door
( A 1 ).
2. Unscrew the screws ( B 1 ) of the decor frame ( B 2 ).
3. Remove the decor frame ( B 2 ).
Assembling the lock (fig.
9
, page 8)
1. Put the new lock cover ( A 1 ) into place.
2. Put the decor ( B 1 ) into the decor frame ( B 3 ).
3. Screw the decor frame ( B 3 ) onto the door ( B 2 ).
4. Install the door lock ( C 1 ).
5. Install the lock catch in the cabinet ( D 1 ).
Assembling the drawer (fig.
0
, page 8)
1. Push the gasket ( 1 ) on the decor frame ( 2 ).
2. Screw the door handle ( 4 ) onto the door.
3. Push the plugs ( 3 ) on the screws of the door handle ( 4 ).
4. Push the drawer into the cabinet.
DometicDM20D-DM20F_IOM_4445103431_AMER4_xxxx-xx-xx.book Seite 18 Dienstag, 14. Dezember 2021 7:39 07