Dometic DM20D, Инструкция по установке и эксплуатации

Страница: 17 / 72

EN
DM20 Installation
17
6 Installation
!
6.1 Notes on mounting into furniture
You can mount the minibar in four ways into furniture. Choose your favored
alternative (fig.
5
, page 5).
Observe the following:
• The cut-out dimensions H x W x D are:
–
DM 20D : 385 x 404 x 428 mm (15.2 x 15.9 x 16.9 in.)
– DM 20F : 385 x 404 x 426 +d mm (15.2 x 15.9 x 16.8 +d in.)
d is the thickness of the hotel‘s own decor
• The clearance between the minibar‘s back and the furniture wall should be
approx. 10 mm (0.39 in.).
• The ventilation openings for the chosen alternative have to be produced (fig.
5
,
page 5).
• Air passing through the inlet air duct must not be heated by any heat sources
(heaters, direct sunlight, gas ovens etc.).
➤
Fix the refrigerator in place using suitable screws (fig.
6
1 and 2, page 6).
6.2 Connecting the minibar electrically
➤
Plug the AC connection cable into the AC voltage socket and connect it to the
AC mains supply.
✔
The status LED lights up.
✔
The minibar starts cooling the interior.
6.3 Mounting hotel's own door decor (DM20F only)
The hotel's own door decor has to comply with the following requirements:
• Maximum weight: 2 kg (4.4 lb.)
• Maximum thickness: 14 mm (0.55 in.)
➤
Fasten the decor with four screws.
CAUTION! Health hazard
To avoid a hazard due to instability of the device, it must be fixed in
accordance with the instructions.
DometicDM20D-DM20F_IOM_4445103431_AMER4_xxxx-xx-xx.book Seite 17 Dienstag, 14. Dezember 2021 7:39 07