Dometic Cup Cooler, Инструкция по установке и эксплуатации

Страница: 12 / 136

EN
Troubleshooting Cup Cooler
12
8 Troubleshooting
9 Warranty
The statutory warranty period applies. If the product is defective, please
contact your retailer or the manufacturer's branch in your country (see the
back of the instruction manual for the addresses).
For repair and guarantee processing, please include the following docu-
ments when you send in the device:
 A copy of the receipt with purchasing date
 A reason for the claim or description of the fault
10 Disposal
➤
Place the packaging material in the appropriate recycling waste bins
wherever possible.
M
If you wish to finally dispose of the product, ask your local recycling
centre or specialist dealer for details about how to do this in
accordance with the applicable disposal regulations.
Problem Possible cause Suggested remedy
LED lights are
not on when
the switch is
on. Fuse has blown. Check for blown fuse on unit, on house
battery, or an open circuit breaker.
There is no voltage. Verify polarity of DC voltage: Positive to
positive and negative to negative.
Make sure all electrical connections are
tight.
If 12 V DC power is available and unit is
not working, unit needs to be replaced.
Unit’s high-heat cut
off is at 65 °C and if
reached, unit will shut
down. This is usually
caused by lack of air
flow or high ambient
temperature. Ensure good ventilation.