Dometic CTS 4110, Руководство по эксплуатации

Страница: 13 / 20

13
Using the toilet
n
Place the cassette tank in an upright positi-
on and turn the emptying spout upwards.
Remove the cap from the spout.
n
Hold the cassette tank with one hand by
the handle
(2) . With the other hand hold it
at the blade handle (3) so that you can ope-
rate the vent button (1) during emptying.
n
The vent button should only be pressed
once the emptying spout is pointing
downwards.
The tank empties evenly and
without squirting.
n
After emptying, flush the cassette tank tho-
roughly with water. Then make the tank
operational again as described in section
"4.2", before inserting it in the toilet.
Avoid turning the spout by more than 90°,
as it may otherwise come loose.
CAUTION!
Do not shake the cassette tank violently.
Do not clean the inside of the cassette
tank with a high pressure cleaner.
This can damage the float for the filling
level indicator.
CAUTION!
Fig. 16
Fig. 15
x242 6015-35_AUS_CT4000_Bedienung_N1-1_Layout 1 23.01.2013 14:30 Seite 13