Dometic CoolFreeze CF-35, Руководство по эксплуатации

Страница: 13 / 284

EN
CF35, CF40, CF50 Operation
13
6.2 Energy saving tips
•
Choose a well ventilated location which is protected from direct sunlight.
•
Allow warm food to cool down first before placing it in the cooling device to
keep cool.
•
Do not open the cooling device more often than necessary.
•
Do not leave the cooling device open for longer than necessary.
•
Defrost the cooler once a layer of ice forms.
•
Avoid unnecessary low temperatures.
6.3 Connecting the cooler
Connecting to a battery (vehicle or boat)
The cooler can be operated with 12 V
g
or 24 V
g
.
A
For safety reasons the cooler is equipped with an electronic system to prevent the
polarity reversal. This protects the cooler against short-circuiting when connecting to
a battery.
➤
Plug the 12/24 V connection cable (fig.
1
2, page 3) into the DC voltage
socket and also into the cigarette lighter or a 12 V or 24 V socket.
Connecting to a 100 – 240 V AC mains (e.g. in the home or office)
D
The coolers have an integrated multi-voltage power supply with priority circuit for
connecting to an AC voltage source of 100 – 240 V. The priority circuit automatically
switches the cooler to mains operation, if the device is connected to a 100 – 240 V
AC mains, even if the 12/24 V connection cable is still attached.
NOTICE! Danger of damage!
Disconnect the cooler and other consumer units from the battery before
you connect the battery to a quick charging device.
Overvoltage can damage the electronics of the device.
DANGER! Danger of electrocution!
•
Never handle plugs and switches with wet hands or if you are
standing on a wet surface.
•
If you are operating your cooler on board a boat from a mains
connection of 100 – 240 V
w
, you must install a residual current cir-
cuit breaker between the 100 – 240 V AC mains and the cooler.
Seek advice from a trained technician.
CF35-CF50-O-16s.book Seite 13 Montag, 9. Juli 2018 9:09 21