19
EN
CoolAir RT780, SP950T
Configuration of unit software
8.5
Menu level 4: Default setting
You can reset the parameters you set in configuration mode on menu levels 1 to
3 to the default settings:
➤
Start configuration mode (chapter “Starting and ending configuration mode”
on page 15).
✓
The first digit of the display shows the menu level and the second and third
show the parameter which can be set.
➤
Press the
+
button three times to switch to menu level
4
.
✓
The display shows
--
.
➤
Press the
button, to reset the unit to the factory settings.
✓
--
flashes in the display.
➤
Press the
+
button.
✓
The display shows
00
.
➤
Press the
button to confirm your entry.
✓
The parameters set in configuration mode are reset to the default setting.
✓
You are now in menu level 4 and can use the
+
and
–
buttons to switch
between menu levels.
8.6
Menu level 5: Temperature unit display
The system can display the room temperature in °C or °F. This parameter can be
configured:
➤
Start configuration mode (chapter “Starting and ending configuration mode”
on page 15).
✓
The first digit of the display shows the menu level and the second and third
show the parameter which can be set.
➤
Press the
+
four times to switch to menu level
5
.
➤
Press the
button to change the parameters.
✓
The digits in the display flash until the parameter you entered is confirmed.
➤
Use the
+
and
–
buttons to select the temperature unit that the system should
display.
➤
Press the
button to confirm your entry.
✓
The set value is saved and is then used when the unit is restarted.
✓
You are now in menu level 5 again and can use the
+
and
–
buttons to switch
between menu levels.
576378QL,VERRN6HLWH'RQQHUVWDJ'H]HPEHU
Содержание COOLAIR RT780
Страница 6: ......
