Dometic CFX95DZ2, Руководство по эксплуатации

Страница: 16 / 376

EN
Operation CFX95DZ2
16
For safety reasons the cooler is equipped with an electronic system to pre-
vent the polarity reversal. This protects the cooler against short-circuiting
when connecting to a battery.
➤
Plug the DC connection cable (fig.
1
2, page 3) into the device
DC voltage socket and also into a DC socket.
Connecting to the AC mains (e.g. in the home or office)
D
The coolers have an integrated multi-voltage power supply with priority circuit
for connecting to an AC voltage source. The priority circuit automatically
switches the cooler to mains operation, if the device is connected to an AC
mains, even if the DC connection cable is still attached.
➤
Plug the AC connection cable (fig.
1
3, page 3) into the device AC
voltage socket and connect it to the AC voltage mains.
7.4 Using the battery monitor
The device is equipped with a multi-level battery monitor that
protects your vehicle battery against excessive discharging when
the device is connected to the on-board DC supply.
If the cooler is operated when the vehicle ignition is switched off, the cooler
switches off automatically as soon as the supply voltage falls below a set
level. The cooler will switch back on once the battery has been recharged to
the restart voltage level.
A
DANGER! Danger of electrocution!
z Never handle plugs and switches with wet hands or if you are
standing on a wet surface.
z If you are operating your cooler on board a boat from an AC
mains connection, you must install a residual current circuit
breaker between the AC mains and the cooler.
Seek advice from a trained technician.
NOTICE! Danger of damage!
When switched off by the battery monitor, the battery will no
longer be fully charged. Avoid starting repeatedly or operating
current consumers without longer charging phases. Ensure that
the battery is recharged.