EN
CFX28 – CFX65W
Operation
15
7.2
Saving energy
•
Choose a well ventilated location which is protected from direct sunlight.
•
Allow warm food to cool down first before placing it in the cooling device to
keep cool.
•
Do not open the cooling device more often than necessary.
•
Do not leave the cooling device open for longer than necessary.
•
If the cooler has a basket: For optimal energy consumption, position the basket
according to its position on delivery.
•
On a regularly basis, make sure the lid seal still fits properly.
7.3
Connecting the cooler
!
Connecting to a battery (Vehicle or boat)
The cooler can be operated with 12 V
g
or 24 V
g
.
A
For safety reasons the cooler is equipped with an electronic system to prevent
polarity reversal. This protects the cooler against short-circuiting when connecting to
a battery.
Using the fused DC plug
A
➤
Plug the DC connection cable (fig.
2, page 3) into the DC voltage inlet of the
cooler (fig.
WARNING! Fire hazard!
•
When positioning the device, ensure the supply cord is not trapped
or damaged.
•
Do not locate multiple portable socket-outlets or portable power
supplies at the rear of the device.
NOTICE! Danger of damage!
Disconnect the cooler and other consumer units from the battery before
you connect the battery to a quick charging device.
Overvoltage can damage the electronics of the device.
NOTICE! Danger of damage!
For protection of the device the DC cable supplied includes a fuse inside
the plug. Do
not
remove the fused DC plug.
Only use the DC cable supplied.
DometicCFX28-CFX65W_OPM_4445102877_EMEA16_xxxx-xx-xx.book Seite 15 Freitag, 18. Dezember 2020 8:54 20
