EN
Breathe Easy™
Cleaning and caring for Breathe Easy™
27
10
Cleaning and caring for
Breathe Easy™
!
CAUTION!
Always disconnect the plug before you clean and service
the device.
!
CAUTION! Beware of burns
Let the ultraviolet lamp cool down before cleaning.
A
NOTICE!
Never clean the device under running water or in dish water.
Do not use abrasive cleaning agents or hard objects during
cleaning as these can damage the device.
➤
Wipe the exterior of the device occasionally with a soft, dry cloth.
➤
Pay special attention to dirt and dust in the air vents.
➤
Clean the interior with canned air to blow out any dust.
➤
Clean the fan (fig.
1
1, page 3) with a soft brush when you replace the
ultraviolet lamp or if you notice a reduction in the air flow.
➤
Clean the removable nano-mesh divider (fig.
1
2, page 3) if you notice a
reduction in the air flow.
To do this, lift it out of the slots and clean it with a soft brush or with water
and detergent.
Let it dry, then slide it back in the slots.
➤
Clean the non-removable nano-mesh strips (fig.
1
4, page 3) with a soft
brush.
➤
If necessary, clean the ultraviolet lamp with a soft cloth and alcohol.
_BreatheEasy_A5.book Seite 27 Dienstag, 24. Januar 2012 3:31 15