Dometic B1600, Руководство по эксплуатации, техническому обслуживанию и установке

Страница: 14 / 334

12
users ‘ instructions
GB
B1600 - B1600PLUS - B2200 - B2600
TIMER
0/
0''
Note: Every time the timer button is pressed, the display fl ashes for 15 seconds while waiting for the settings
to be modi fi ed. Remember to set the clock to the correct time before using this function.
Setting the “ON” timer (automatic startup)
1) Press the TIMER button and the ON clock will start to fl ash.
2) Set the time required using the + and - buttons
3) Point the remote control at the receiver and press the “SET” button to con
fi rm
Setting the “OFF” timer (automatic shutdown)
1) Press the TIMER button twice and the OFF clock will start to fl ash.
2) Set the time required using the + and - buttons
3) Point the remote control at the receiver and press the “SET” button to con
fi rm
Setting the “ON” & “OFF” timer (Automatic on/off)
1) Press the TIMER button three times and the ON clock will start to fl ash while the OFF clock is visible.
2) Set the required ON time using the + and - buttons
3) Press the TIMER button and set the required OFF time using the + and - buttons
4) Point the remote control at the receiver and press the “SET” button to con
fi rm
SLEEP
1) Select the required temperature.
2) Press the SLEEP button
Note: The SLEEP function lowers the set temperature by 1° after one hour and by 2° after
two hours.
I FEEL
1) Press the I FEEL button to enable the function.
2) Position the remote control so that it is possible to send signals to the receiver.
3) The operating temperature is adjusted to the temperature detected by the remote control.
Note: The remote control must not be in an area that is much warmer or much cooler than
the normal room temperature (e.g.: exposed to direct sunlight or to the cold air coming from
the diffuser.)
I FEEL I FEEL
¡$
0/
0''