• Tightening the belt :
• Slide the loose end of the belt through the slot
and slightly tighten.
• Move the handle
for- and backwards at
least 4 times to make sure that the belt firmly
attached. The belt must be winded at least 3
times around the axis.
• Pull the lock
upwards and move the
handle
to the left to its basic position.
• Releasing the belt :
• Pull the lock
upwards and move the handle
to the right in horizontal
position.
• The belt frame
is released and the belt can be pulled out.
Electrical connection
The refrigerator can be operated with 3 different energy supplies :
Internal battery
• The unit is equipped as standard with an internal battery ( second battery available
as an option). If no external power supply is available, the unit can be operated with
this battery, until the integrated battery guard switches off the unit.
External DC-Connection
• If the refrigerator is loaded into the car, it can be connected to the 12V power
system of the car using the installed plug. As soon as the generator provides energy
i.e. when the car is running, the refrigerator is supplied by the car system. At the
same time the internal battery is charged.
• Due to the constant load of 25A when connected to the 12V power system, only the
original connection system must be used. All additionally needed components are
available as accessories. (see chapter “Accessories”)
• The installation and connection must only be done by a certified electrician.
External AC-Connection
• As soon as the vehicle is parked and an power connection is available, the
refrigerator may be connected to an AC mains supply (220-240V, 50-60Hz). At the
same the internal battery is charged. In consequence of the integrated priority
circuit, the DC connection is switched off, if AC power is available.
19
Содержание AC 8500
Страница 2: ...2 ...