Dometic 9600050033, Инструкция по установке и эксплуатации

Страница: 16 / 228

EN
Installation RH418NTE, RH 418NTEG
16
5 Installation
!
!
A
The cooling device is designed for free-standing installation, but can be built-in if the
following conditions are complied with to ensure satisfactory operation and maxi-
mum cooling efficiency.
• The cooling device must be levelled carefully to ensure proper function.
• For the glass door version: When the ambient humidity is above 65 % at 25 °C
ambient temperature, moisture will condense on the door.
• The socket outlet for the mains connection must be freely accessible.
5.1 Changing the decorative plate
➤
Change the decorative plate as shown (fig.
3
, page 4 to fig.
6
, page 4).
5.2 Reversing the door
➤
Reverse the door as shown (fig.
7
, page 5 to fig.
0
, page 5).
I
For versions with automatic door control, proceed as follows:
1. Pull out the LED (fig.
1
3, page 3).
2. Lay the cable in the guide.
3. Insert the LED on the device‘s foot on the other side.
WARNING! Fire hazard
• When positioning the device, ensure the supply cord is not trapped
or damaged.
• Do not locate multiple portable socket-outlets or portable power
supplies at the rear of the device.
CAUTION! Health hazard
To avoid a hazard due to instability of the device, it must be fixed in
accordance with the instructions.
NOTICE! Damage hazard
Do not use extension cords or ungrounded (two prong) adapters.
NOTE
The LED of the automatic door control (optional) must always be located
opposite the door hinge.