Dometic 9600014024, Руководство по эксплуатации

Страница: 13 / 236

EN
PLB40 Using the appliance
13
✔
The display shows the charging status.
➤
If charging the battery pack with a solar panel, observe the following require-
ments:
–
Use without a solar controller:
Ensure that the solar panel outputs between 8 – 25 V DC and a maximum
charging current of 10 A.
– Use with a solar controller:
Ensure the solar charger does not need a counter voltage from the battery
side to start charging. Ensure that the maximum charging current is 10 A
(check with the solar panel manufacturer).
6.4 Checking the charge level
➤
Press the power button (fig.
2
1, page 3).
✔
The display shows the battery state of charge as a percentage.
✔
The symbol flashes when the battery capacity is below 20 %.
6.5 Connecting consumer devices
fig.
2
, page 3
➤
Open the cap for the desired device:
–
USB devices ( 3 )
– 2-pin 12 V DC socket outlet ( 4 )
– 12 V DC socket ( 5 )
➤
Insert your device’s plug into the corresponding socket.
✔
The symbol and the related output symbol light up.
6.6 Replacing fuses
➤
Ensure that the battery pack is not connected to AC/DC or DC/DC charger.
➤
Disconnect all loads.
➤
Press the power button for at least 3 s to switch the battery pack off.
➤
Undo the fuse holder.
➤
Replace the fuse with a 20 A 3 AG glass-slow acting fuse.
DometicPLB40_OPM_4445102672_EMEA16_20xx-xx-xx.book Seite 13 Dienstag, 26. Januar 2021 4:43 16