EN
Safety instructions
SMP439-11 (7LA.915.681)
8
A
NOTICE!
•
If cables have to be fed through metal walls or other walls with sharp
edges, use ducts or bushings to prevent damage.
•
Do not lay cables which are loose or bent next to electrically conduc-
tive material (metal).
•
Do not pull on the cables.
•
Do not lay the AC mains cable and the DC cable in the same duct.
•
Set up the device in a dry location where it is protected against splash-
ing water.
•
Protect the device and the cable against rain and moisture.
•
Store the device in a dry and cool place.
2.3
Operating the device safely
D
DANGER! Danger of electrocution
•
Do not touch exposed cables with your bare hands. This applies espe-
cially when operating the device from the AC mains.
•
To be able to disconnect the device quickly from the mains, the socket
must be close to the device and be easily accessible.
!
WARNING!
•
Do
not
operate the device in systems with lead acid batteries. These
batteries give off explosive hydrogen gas that can be ignited by sparks
on electrical connections.
!
CAUTION!
•
Do
not
operate the device
–
In wet or damp environments
–
In the vicinity of corrosive fumes
–
In the vicinity of combustible materials
–
In areas where there is a danger of explosions.
•
Before starting the device, ensure that the power supply line and the
plug are dry.
•
Always disconnect the power supply when working on the device and
ensure that the device is voltage-free.
•
Please observe that parts of the device may still conduct voltage even
if the fuse has blown.
•
Do not disconnect any cables when the device is still in use.
Содержание 7LA.915.681
Страница 3: ...SMP439 11 7LA 915 681 3 3 2 1 4 8 7 6 5 1 1 4 3 2 2...
Страница 4: ...SMP439 11 7LA 915 681 4 95 2 5 100 74 67 125 70 27 5 27 5 54 5 100 3...
Страница 34: ......
Страница 35: ......
