3
EN
Intended Use
1.3 Supplemental Directives
To reduce the risk of accidents and injuries, please
observe the following directives before proceeding to
install
this product:
• Read and follow all safety information and
instructions.
• Read and understand these instructions before
installing this product.
• The installation must comply with all applicable local
or national codes, including the latest edition of the
following standards:
U.S.A.
– ANSI/NFPA70, National Electrical Code (NEC)
– ANSI/NFPA1192, Recreational Vehicles Code
Canada
– CSA C22.1, Parts l & ll, Canadian Electrical Code
– CSA Z240 RV Series, Recreational Vehicles
1.4 General Safety Messages
WARNING: ELECTRICAL SHOCK, FIRE, AND/
OR EXPLOSION HAZARD. Failure to obey the
following warnings could result in death or
serious injury:
• Use care when diagnosing and/or adjusting
components on a powered unit.
• Use only Dometic replacement parts and
components that are specifically approved for use
with the appliance.
• Avoid improper installation, adjustment, alterations,
service, or maintenance of the appliance. Service and
maintenance
must
be done by a qualified service
person only.
• Do
not
modify this product in any way. Modification
can be extremely hazardous.
NOTICE:
This product is for use with 12 VDC only.
2 Intended Use
The 12 VDC Power Case/Cassette Awning (hereinafter
referred to as “awning,” or “product”) is designed and
intended for use on a Recreational Vehicle (hereinafter
referred to as “RV”) with straight sides. It is especially
well-suited for RVs with an over-cab extension where
there isn’t a sufficient surface for a bottom mounting
bracket. Use these instructions to ensure the correct
operation of the product. This product is only suitable
for the intended purpose and application in accordance
with these instructions.
This manual provides information that is necessary for
proper
installation
of the product. Poor installation and/
or improper operating or maintenance will result in
unsatisfactory performance and a possible failure. The
manufacturer accepts no liability for any injury or damage
to the product resulting from:
• Incorrect assembly or connection, including excess
voltage
• Incorrect maintenance or use of spare parts
other than original spare parts provided by the
manufacturer
• Alterations to the product without express permission
from the manufacturer
• Use for purposes other than those described in this
manual
Dometic reserves the right to change product
appearance and product specifications.
3 General Information
This section provides general information about the
awning and its components.
I
The images used in this document are for reference
purposes only. Components and component
locations may vary according to specific product
models. Measurements may vary ±0.38 in. (10 mm).
