Dometic GROUP Waeco CoolFreeze CFX28, Руководство по эксплуатации

Страница: 38 / 340

EN
Operation CFX28 – CFX65DZ
38
In “HIGH” mode, the battery monitor responds faster than at the levels “LOW”
and “MED” (see the following table).
The battery monitor mode can be selected as follows:
➤ Switch on the cooler.
➤ Press the “SET” button (fig. 3 4, page 3) three times.
➤ Use the “UP +” (fig. 3 7, page 3) or “DOWN –” (fig. 3 6, page 3)
buttons to select the battery monitor mode.
✓ Digital display will be as follows:
Lo (LOW),
Π d (MED), Hi (HIGH)
✓ The selected mode then appears in the display for a few seconds. The
display flashes several times before it returns to the current temperature.
I
Battery monitor mode LOW MED HIGH
Switch-off voltage at 12 V
10.1 V 11.4 V 11.8 V
Restartvoltage at 12 V
11.1 V 12.2 V 12.6 V
Switch-off voltage at 24 V
21.5 V 24.1 V 24.6 V
Restart voltage at 24 V
23.0 V 25.3 V 26.2 V
NOTE
When the cooler is supplied by the starter battery, select the
battery monitor mode “HIGH”. If the cooler is connected to a
supply battery, the battery monitor mode “LOW” will suffice.