Dometic GROUP BUTTNER PowerPack BASIC, Сборка, установка и руководство по эксплуатации

Страница: 16 / 68

16 4445103621
Installing the accessory kit
!
I
MT PowerPack BASIC:
Legend for fig.
1
, page 3 to fig.
3
, page 5:
Connection variant A
Connection variant for vehicles that are to be
equipped with a house battery and a charging
device.
➤
To connect the accessory kit proceed as shown
in fig.
1
, page 3.
Connection variant B
Connection variant for vehicles with a cutoff relay
present.
➤
To connect the accessory kit proceed as shown
in fig.
2
, page 4.
Connection variant C
Connection variant for motor homes with existing
central electrical system.
➤
To connect the accessory kit proceed as shown
in fig.
3
, page 5.
MT PowerPack CLASSIC I + II:
Legend for fig.
4
, page 6 to fig.
6
, page 8:
1. Install the solar system.
2. Protect the positive cable of the solar charger
with a fuse (25 A) ( 6 ).
3. Select the appropriate connection variant and
install the battery control booster.
4. Protect the positive cable of the house battery
as close to the battery as possible with a fuse
(80 A) (
7 ).
5. Protect the positive cable of the starting bat-
tery as close to the battery as possible with a
fuse (80 A) (
7 ).
6. Install the battery monitor.
7. Protect the sense cables on the shunt with a
fuse (5 A) ( 8 ).
8. Optionally connect the battery monitor to the
battery control booster ( 9 ) (see chapter “Con-
necting the battery monitor to the battery con-
trol booster (optional)” on page 18).
WARNING!
Observe the instructions and safety pre-
cautions for all components used in the
accessory kit.
NOTE
Find the detailed information on mount-
ing the accessory kit in the respective
installation and operating manual (see
chapter “Related documents” on
page 15).
The electrical power supply must be
connected by a qualified electrician who
has demonstrated skill and knowledge
related to the construction and opera-
tion of electrical equipment and installa-
tions and has received safety training to
identify and avoid the hazards involved.
No Description
1 Battery control booster
2 Battery monitor
3 Current sensor (Hall sensor)
No Description
1 Battery control booster
2 Solar panel with junction box
3 Solar charger
4 Battery monitor
5 Shunt
6 Fuse holder FS-3 with fuses (5 A, 25 A)
7 Fuse holder ME with fuse (40 A)
8 Fuse holder FS-1 with fuse (5 A)
9 Control cable for connecting the battery
monitor to the battery control booster