Dometic GROUP 9102600033, Инструкция по установке и эксплуатации

Страница: 25 / 220

EN
SinePower Fastening the inverter
25
The inverter has the following connections, displays and control elements:
6 Fastening the inverter
You can fasten the inverter using the four holders supplied.
When selecting the installation location, observe the following instructions:
 The inverter can be mounted horizontally or vertically.
 The inverter must be installed in a place that is protected from moisture.
 The inverter may not be installed in the presence of flammable materials.
 The inverter may not be installed in a dusty environment.
 The place of installation must be well-ventilated. A ventilation system
must be present for installations in small, closed spaces. The minimum
clearance around the inverter must be at least 25 cm.
 The air intake on the underside or the air outlet on the back side of the
inverter must remain clear.
Pos. in
fig. 1 , page 3
Element
1 Switches
0: device is switched off
I: device is switched on
2 Green Status LED: lights up when inverter is in operation
3 Red Status LED: indicates malfunction
4 USB port
5 MSI412, MSI424 only: Connection for external switch
6 Cover for 230 V
w
safety socket
7 Holders
Pos. in
fig. 2 , page 4
Element
1 Connection cable for direct current
2 Fan