Domestia DME-LAN-002, Руководство пользователя

Страница: 37 / 40

37
8. TROUBLESHOOTING
Problems encountered Possible causes Solutions
I can’t connect the Home
Manager application to my
DME-LAN-002
Network configuration
incorrect
Restart the DME-LAN-002
if it is connected to a Wi-Fi
router. The DME-LAN-002
automatically adapts its IP
address to the network it
is connected to when it is
started.
Reset the IP parameters
of the DME-LAN-002 by
pressing the reset button 5
times
Scan the IP address of
the DME-LAN-002 via the
“Parameters” menu before
trying to connect.
The IP addresses of the
DME-LAN and the device
(tablet, PC, etc.) cannot
be identical. By default, the
IP address of the DME-LAN
ends in 210.
The application (tablet,
smartphone or PC) is on
a different network to the
DME-LAN-002
Connect the device or
DME-LAN-002 to the correct
network.
I am unable to program a
pushbutton. The bulb lights
in programming mode, but
the button doesn’t react
The identification module
bus is not connected
properly
The identification module
bus must be connected to
the DME-LAN and not to a
DMC-012-002 card.
Too many addresses are
already programmed on
the identification module
bus
You can program a maxi-
mum of 70 different func-
tions per bus line. If the
maximum threshold is
reached, you need to split
the bus. (Four bus lines
are available on the DME-
LAN-002)
Short circuit on the bus line
(The line’s red LED is lit)
Find the short circuit