Domestia DME-LAN-002, Руководство пользователя

Страница: 21 / 40

21
1 «Toggle» or stepping switch group
This group is used to turn lighting outputs on or off and to vary the brightness (dimmer).
A short press on the button reverses the status of the outputs. A long press activates the
outputs and, in the case of dimmers, varies the brightness.
2 «Switch all on» group
This group is used to light all the lighting outputs. A short or long press on the button
activates the outputs
3 »Switch all off» group
This group is used to extinguish all the lighting outputs. A short press deactivates all the
outputs selected.
A long press deactivates the outputs after 30 seconds.
4 «Close all» group
This group is used to activate the «close shutters» outputs. A short press activates the
outputs for the closure time that has been configured for these outputs. A long press
activates the outputs while the button is pressed.
5 «Open all» group
This group is used to activate the «open shutters» outputs. A short press activates the
outputs for the opening time that has been configured for these outputs. A long press
activates the outputs while the button is pressed.
6 «Scenario» group
This group is used to define the status of all the lighting or shutter outputs (active, inactive
or brightness for the dimmers).
7»Simulation» group
This group of lighting outputs is used to simulate a presence. The group must operate with
a switch (contact maintained) and also be activated by an event. When the switch is
active and an event activates the «Simulation», then the group’s outputs are lit one after
another in a random order and for a random period of time (between 1 and 60 minutes).
Then select the outputs that must be part of the group.
An output can be added by clicking on the list on the right. It can be deleted by clicking
the bin icon on the left, before and after selecting the outputs concerned.
GROUPS