14 | Dome Sx Display
Dome S3c Specification
In locations where 240V outlets are used, connect the Dome S3c display to a center-
tapped, 240V, single-phase supply only (for Canada and the United States).
Category
Characteristic Item
Specification
Screen
Type
AMLCD (active-matrix liquid crystal display)
Screen size diagonal
540 mm (21.3 in.)
Resolution
1536 x 2048 pixels (portrait)
2048 x 1536 pixels (landscape)
Pixel pitch
0.2115 mm, 120 dpi
Pixel arrangement
R,G,B vertical stripe
Active area (H x V)
433.2 x 324.9 mm (17.05 x 12.79 in.)
Color supported
16.7 million colors; 256 shades of gray
(programmable gamma from palette of up to
2041 shades)
Refresh rate
60 Hz
Contrast ratio
750:1 typical; 600:1 minimum
Brightness
700 cd/m
2
typical; 550 cd/m
2
minimum (when new)
Pixel rise/fall time
24 ms typical (14 ms Tr/10 ms Tf)
Viewing angle (CR 10: 1)
170° (± 85°) horizontal/vertical
Interface
Digital Video In
DVI Rev. 1.0 digital dual-channel connector
DisplayPort Revision 1.1a connector
Display control (brightness/contrast) DDC2B+
Display identification
EDID read using DDC2B+
USB hub (on stand)
N/A
USB uplink (on display)
Universal Serial Bus Rev. 2.0: 1 uplink B port
Display status
Dual-stack tricolor LEDs on back of unit
Input formats
Landscape orientation
2048 x 1536 (24-bit per pixel; 30-bit per pixel
via DisplayPort)
Portrait orientation
1536 x 2048 (24-bit per pixel; 30-bit per pixel
via DisplayPort)
VGA/XGA
640 x 480 to 1280 x 768 pixels (displayed in
portrait orientation)
Physical
Display size (without stand)
472 mm x 363 mm x 102 mm
(18.6 in. x 14.3 in. x 3.9 in.)
Display weight (without stand)
6.4 kg (14.0 lb.) typical
Display weight (with stand)
9.3 kg (20.5 lb.) typical
Mounting options
Desktop stand (standard);
100-mm VESA compliant mounting
Power
Adapter
BridgePower BPM150S24F05 (with power switch)
(CAUTION: Use only the adapter supplied with unit.)
