Page 15
Siren Advanced User Manual
Troubleshooting
:
Q Help! My Siren paired successfully, but my controller can’t see it
anymore after I installed it!
:
A First, make sure your battery didn’t come loose during set-up. Otherwise, the
Z-Wave signal is probably weak in that area of your home. Remember that
the 120' - 150' range doesn’t take into account walls, furniture, and other
obstacles. To boost your Z-Wave network coverage, add a few non-battery
powered Z-Wave devices between the controller and the furthest device,
like the Dome On/Off Plug or Water Main Shut-Off. You can even purchase
dedicated Z-Wave extenders from 3rd party manufacturers.
:
Q There’s so many words in this manual I don’t understand. How can
I learn more about Z-Wave?
:
A Remember you don’t have to understand everything in this manual to start
automating your home. Our Quick-Start Guides have all you need to start
using any device. For more thorough information about Z-Wave home
automation, visit www.domeha.com/support.
:
Q I’ve tried multiple times, but I can’t include the Siren in my system.
:
A Check your battery and make sure your device is powered. Then, Factory
Reset (see “Resetting the Siren” on page 8) and repeat the inclusion
process. If you are still having issues, visit www.domeha.com/support
:
Q The Siren is so loud! How can I make it quieter?
:
A Fully supported Z-Wave controllers should allow volume adjustment—visit
www.domeha.com/support for a list of controllers tested to fully work with
our products. Otherwise, place the siren in a drawer or underneath some-
thing else to make the notifications milder to the ear.
:
Q All of a sudden, my Siren is offline.
:
A Check your battery and make sure your device is getting power. If powered,
make sure you still have Z-Wave network coverage. If you are still having
issues, visit www.domeha.com/support.
Troubleshooting
