Page 12
Extender Advanced User Manual
“Configuration” Command Class Parameters
Configuration parameters are sent using a standard syntax to ensure interopera-
bility between all manufacturers’ products. All values are represented using the
hexadecimal number system.
Typical syntax is as shown below. Note that the value sent must be the exact size,
in bytes, as accepted by the setting. The “extra” spaces should be filled with zeros
(see the “value” column below.)
Example Configuration Parameter:
02 02 00 0A
Param #
Size
Value
02
(Param #2)
02
(2 Bytes)
00 0A
(10)
“Configuration” Command Class Parameters
Table 5 -
Extender Con iguration Parameters
Param
#
Size
Name
Available Values
Default
Value
01
This parameter sets the luminance (brightness) level at which night light is turned off. This is
a unitless value that can be set to any value from 0 - 10, with a default value of 5. The higher
this value, the brighter the ambient light must be to turn off the night light.
01
Night Light “Off” Threshold
00 ~ 0A
(0 ~ 10)
05
(5)
02
This parameter sets the luminance (brightness) level at which night light is turned on. This is
a unitless value that can be set to any value from 0 - 10, with a default value of 5. The lower
this value, the dimmer the ambient light must be to turn on the night light.
01
Night Light “On” Threshold
00 ~ 0A
(0 ~ 10)
05
(5)