7
Parking Brake Inhibit
• When the “BRAKE” cable is connected to
the brake switch, the display on the TFT
monitor will display video only when the
vehicle is applied.
• Parking brake function is overridden when
the video source is set to REVERSE.
• When the parking brake inhibit is active,
the front monitor displays “WARNING Do
not watch video while driving!”, preventing
the driver from watching content while
driving. Rear video screens are not
affected.
Mute
Press [
VOL/ /
] knob or the [ MUTE ]
button on remote control to mute the volume
from the unit. Press again to restore the
volume. [
] is displayed on the LCD.
Adjusting the volume or using any of the
audio setup features cancels the mute
function.
Power On / Off
Press the
[
VOL/ /
]
knob on the unit (or
the [ POWER ] button on the remote control)
to turn the unit on. The current mode status
appears in the LCD.
Press and hold the
[
VOL/ /
]
knob to
power off the unit.
Audible Beep Confirmation
An audible beep tone confirms each function
selection. The Beep tone can be disabled
through the Setup menu.
Playing Source Selection
Press the [ MENU ] button on the front panel
or the [ SRC ] button on the remote to change
between available playing sources. The
playing mode is displayed on the screen.
3
1
2
2
1. Date and Time display.
2. Function icons
3. All SRC.
Volume Adjustment
To increase or decrease the volume level,
turn the
[
VOL/ /
]
knob on the front panel
or press the [ VOL+ ] / [ VOL ] button on the
remote control. The volume ranges from “0”to
“39”. The LCD or TFT screen displays the
volume level for 3 seconds.
EQ Menu
The Audio Control feature allows you to
easily adjust your audio system to meet the
acoustic characteristics of your vehicle, which
vary depending on the type of vehicle and its
measurements. Proper setting of the Fader
and Balance boosts the effects of the cabin
equalizer.
Basic Operations
Содержание DM-DV5768NVU
Страница 26: ...25 Wire Connections ...
Страница 27: ...PN 127075007067 CLASS 1 LASER PRODUCT ...