PXH812 User’s Guide –
Dolphin Interconnect Solutions
Page 11
Configuration and DIP Switches
The PXH812 has one bank of 8 DIP switches. The default factory setting for the PXH812 is Transparent Host mode.
The PXH812 has DIP switches for setting special modes or operations. Please carefully read the documentation
before modifying any DIP switch settings. Please pay careful attention to ON and OFF positions written on the
DIP switch.
DIP Switch Bank
–
Configuration
The DIP switch on the PXH812 is used to configure the adapter card. Please
leave all undocumented DIP switches in the default position.
DIP no
Name
Description
ON
OFF
Default
1
TRANSP
PXH812: Should always be ON
PXH812 will operate in
TRANSPARENT mode
PXH812: Reserved for
future use
ON
2
TARGET
Enable Target or Host operation Card operates in
Target mode
Card operates in Host
mode
OFF
3
SSC
TBD
OFF
4
CLK
TBD
OFF
5
OPT1
TBD
OFF
6
OPT2
Cable tuning
Recommended for 3-5
meter copper cables
or fiber optics
Recommended for 0.5
–
2 meter copper cables or
fiber optics
OFF
7
WAKE
TBD
OFF
8
SAFE
Enables the card to boot with a
corrupted EEPROM
OFF
Note: Some DIP switch configuration options may be removed in the future versions. Please always consult the user guide
for details.
Picture 1: DIP Switch
