Dolphin PXH810, Руководство пользователя

Страница: 11 / 19

PXH810 User
’s Guide – Dolphin Interconnect Solutions
Page 11
Configuration and DIP Switches
The PXH810 has one bank of 8 DIP switches. The default factory setting for the PXH810 is NTB mode, short
cable.
The PXH810 has DIP switches for setting special modes or operations. Please carefully read the documentation
before modifying any DIP switch settings. Please pay close attention to ON and OFF positions written on the
DIP switch.
DIP Switch Bank – Configuration
The DIP switch on the PXH810 is used to configure the adapter card.
Please leave all undocumented DIP switches in the default position.
DIP no. Name Description ON OFF Default
1 TRANSP PXH810: Used to select NTB
or limited TRANSPARENT
operations
PXH810 will operate
in limited
TRANSPARENT
mode PXH810: NTB mode OFF
2 TARGET Enable Target or Host
operation
Card operates in
Target mode Card operates in Host
mode OFF
3 SSC TBD OFF
4 CLK TBD OFF
5 OPT1 TBD OFF
6 OPT2 Cable tuning Recommended for
3-5 meter copper
cables or fiber optics Recommended for 0.5
– 2 meter copper
cables or fiber optics OFF
7
WAKE TBD OFF
8 SAFE Enables the card to boot with
a corrupted EEPROM OFF
Note: Some DIP switch configuration options may be removed in the future versions. Please always consult the
user guide for details.
Picture 2: DIP Switch