13
Rev. E, Mar. 3, 2015
Locating Treatment Points
Point Location:
Point indicator light is located above the ground plate
on the top of the back of the unit. This light, which
turns bright green when unit is turned on, will flicker
“off” when a point has been successfully located.
Difficulty locating points means
dry skin
, turn
sensitivity dial clockwise to between 4-6 to increase
sensitivity. Too many points means
moist skin
, turn
sensitivity dial counter-clockwise to between 1-3 to
decrease sensitivity.
Treatment Button:
Activation/treatment button is located on top
of unit in front of wheel. Once point has been
successfully located, press and hold treatment
button for 20-30 seconds, approximately 20-30
“beeps.”
Increasing/decreasing strength
of stimulation/current
The on/off intensity wheel permits for significant
increasing/decreasing of the output current. On
low, with the wheel slightly rolled forward from
on position, the DNS OTC is producing around 80
microamps. On high, with the wheel rolled all the
way forward, the DNS OTC is producing around
800 microamps.
KEY TIP:
There is no harm in treating points longer than 30 seconds, especially
if you feel it is providing additional benefits. For additional application
tips, contact our customer service at 1 (800) 567-7246,
