Dolphin Hybrid RS1, Руководство по эксплуатации

Страница: 8 / 44

6 Dolphin Hybrid RS 1 - Suction Pool Cleaner
| Operating Instructions
❙ ❙
Cleaning Process
The Dolphin Hybrid Cleaner continues to clean
your pool as long as the pool pump is operating.
The time required to cover all pool surfaces depends
on the pool size. In general, 1-2 hours are sufficient.
During operation, refer to the indicator lights
( Drawing G) on the cleaner to make sure that the
Dolphin Hybrid Cleaner is functioning properly
(see table below).
Table 2: Indicator Lights
Light Indication
Red (2 sec.) Start of operation
Blue — slow blinking Proper functioning — The Dolphin Hybrid Cleaner is moving forward.
Blue — fast blinking Proper functioning — The Dolphin Hybrid Cleaner is making a turn.
Blue and red (2 sec.) Proper functioning — The Dolphin Hybrid Cleaner identifies a wall.
Red — blinking
• Insufficient flow — To correct unsatisfactory flow, refer to Table 1.
• Use the Troubleshooting Guide (Table 3) .
❙ ❙
Clean the Leaf Canister
1 Make sure the pump is
OFF
.
2 Disconnect the Leaf Canister and hold the
adjacent Hose Section.
3 Open the lid by turning it anticlockwise
4 Remove the filter.
5 Clean out leaf and other debris (Drawing H) .
6
Rinse the filter.
7 Return the filter and lid.
8 Connect the Leaf Canister and hose
sections under the water. Make sure to
remove trapped air from the Leaf Canister.
9 Turn the pump
ON
.
Canister
Leaf & debris
Filter
Canister
Lid
I
H
G