Dolphin DOLMGK, Руководство пользователя

Страница: 5 / 8

WIRING
POWER UP SEQUENCES
Color Label Description
Red
+12V dc
Power Supply to the reader
Black GND Signal GND
Green Data0 Wiegand Output data, D0
White
Data1
Wiegand Output data, D1
Yellow
RED LED
RED LED control, active low.
Blue
Green LED
Green LED control, active low
Brown
Buzzer
Buzzer input, active low
Orange
Tamper
Tamper output (open collector, Active low, max 100mA)
Purple Doorbell Door bell output (open collector, +5Vdc output
≤
5mA)
1. When the reader is powered up, the Green LED will blink for
5 seconds. The reader will beep once and is now ready to use.
2. Present the card. The Blue LED will blink once and the buzzer
will beep once.
3. When a card is presented and read by the reader, the card
data will be transmitted to the controller. Whether the LED light
on the reader remains ON or flashes or changes to Green or
Red, depends on the Green and Red LED inputs on the access
controller.
4. For the number pad reader, when a number is pressed and
successfully detected, the back-lit under the number will flash
one time and the buzzer will beep once. The pin being catered
will output by default at a 4 bit burst.