Dolphin DAS400, Руководство пользователя, Страница: 6 / 16

6
The 400F/450F is supplied with longer
6m sensors to fit around the engine
bay. The sensor cabling should be run
down the opposite side of the engine
bay to where the battery is situated to
avoid electrical interference. The Brain
box should be mounted underneath
the dashboard but away from the fuse
box and anything else likely to cause
electrical interference.
A rocker switch is supplied for you
to manually turn the front sensors
on as and when you need them. This
should be connected to an ignition
switched feed, that is a power source
that is live when the car is on, such
as the car stereo system. Alternatively
you may like to visit your local car
dealerships’ parts department to get a
blank switch that matches the design
of the others on your dashboard.
Optionally if you have a modern
CANBus wired car you may have
additionally purchased (or can
purchase, see Spares & Accessories)
a CANBus interface that will take a
speed reading for the cars engine
management system and automatically
bring the sensors on whenever your
speed is below approximately 6mph.
INSTALLATION OF FRONT SENSOR ONLY KIT
DPS400F/450F DMS400F/450F