Dolmar PS-35 C, Руководство по ремонту

Страница: 12 / 28

12
Repair Manual PS-35
Inserting the fl yweights
Hook the springs as shown in the illustration.
The press the
fl yweights onto the guide. To do
this, fi rst push on one fl yweight, then put on
the second fl yweight.
Press the fl yweights all the way onto the
guide.
CAUTION: Note the position of the springs.
Do not replace springs individually! If
a spring breaks or is fatigued, all two
springs must be replaced.
The illustration shows the inside of the clutch.
Installing the clutch
Install the clutch with the arrow marking point
outside.
Torque: 35 ± 2.5 Nm
CAUTION: Before installing the clutch,
disassemble the starter (see chap. 06), in
order to prevent damage to the starting
catches.
04 CLUTCH