10
Repair Manual PS-35
Removing the hand guard and
disengagement mechanism
Remove the starter. See Chap. 06.
Unscrew the handguard screw on the fan side.
Remove the circlip
6
.
Lift the spacer plate
7
over the pin
8
, push it
back a little, and remove it from pin
9
.
Remove the bushing from pin
8
and
9
.
Pull the disengagement mechanism off the
shafts in parallel.
Remove the muf
fl
er. See Chap. 04.
Disengage the fan-side handguard arm
towards the muf
fl
er.
Pull the handguard off pin
9
using light back-
and-forth motions.
Note:
When reassembling, always use a new
circlip
6
(927.304.000)!
Install the handguard in the reverse order.
Make sure that the handguard guide
10
is
not unhooked. If necessary, push it back into
position with a screwdriver (about 4 mm from
pin
9
). The handguard can only be assembled
when the rest piece is in this position.
Assemble the disengagement mechanism,
brake band, and brake band spring in the
reverse order.
03 CHAIN BRAKE
6
7
8
9
10
10
ca. 4 mm
Содержание PS-35 C
Страница 27: ...27 Repair Manual PS 35 NOTES ...
Страница 28: ...DOLMAR GmbH Postfach 70 04 20 D 22004 Hamburg Germany ...
