9
Symbols
END020-3
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
.................... Take particular care and attention.
........ Read instruction manual.
.................. Danger; be aware of thrown objects.
.................. The distance between the tool and
bystanders must be at least 15 m.
.......... Keep bystanders away.
.......... Keep distance at least 15 m.
.................. Wear a helmet, goggles and ear
protection.
.................. Wear protective gloves.
.................. Wear sturdy boots with nonslip soles.
Steeltoed safety boots are
recommended.
.................. Do not expose to moisture.
................... Top permissible tool speed.
............ Never use metal blade.
............ Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of the European
Directives, on Waste Electric and
Electronic Equipment and Batteries
and Accumulators and Waste Batteries
and Accumulators and their
implementation in accordance with
national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be
collected separately and returned to an
environmentally compatible recycling
facility.
For European countries only
ENH222-1
EC Declaration of Conformity
The undersigned, Tamiro Kishima and Rainer
Bergfeld, as authorized by Dolmar GmbH, declare that
the DOLMAR machine(s):
Designation of Machine:
Cordless Grass Trimmer
Model No./Type: AT-1831 C, AT-1831 CD
Specifications: see “SPECIFICATIONS” table.
are of series production and
Conforms to the following European Directives:
2000/14/EC, 2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60335
The technical documentation is on file at:
Dolmar GmbH,
Jenfelder Straße 38, Abteilung FZ,
D-22045 Hamburg
The conformity assessment procedure required by
Directive 2000/14/EC was in Accordance with annex VI.
Notified Body:
TÜV Rheinland LGA Products GmbH
Tillystraße 2
90431 Nürnberg, Germany
Identification number 0197
Measured Sound Power Level: 90 dB (A)
Guaranteed Sound Power Level: 90 dB (A)
18. 3. 2013
Tamiro Kishima
Rainer Bergfeld
Managing Director
Managing Director
IMPORTANT SAFETY
INSTRUCTIONS
GEB109-3
WARNING! Read all safety warnings and all
instructions.
Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for
future reference.
1.
Be familiar with the controls and proper use of the
equipment.
2.
Cutting elements continue to rotate after the
motor is switched off.
3.
Never allow children or people unfamiliar with the
instructions to use the machine.
4.
Stop using the machine while people, especially
children, or pets are nearby.
5.
Only use the machine in daylight or good artificial
light.
6.
Before using the machine and after any impact,
check for signs of wear or damage and repair as
necessary.
7.
Take care against injury from any device fitted for
trimming the filament line length. After extending
new cutter line always return the machine to its
normal operating position before switching on.
8.
Never fit metal cutting elements.
9.
This appliance is not intended for use by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless they have been
given supervision or instruction concerning use
Cd
Ni-MH
Li-ion
