Dolmar AT-1826H, Инструкция по эксплуатации

Страница: 7 / 84

7
ENGLISH (Original instructions)
Explanation of general view
SPECIFICATIONS
• Due to our continuing programme of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
END017-1
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
.................. Take particular care and attention.
..... Read instruction manual.
.................. Danger; be aware of thrown objects.
.................. The distance between the tool and
bystanders must be at least 15 m.
.......... Keep bystanders away.
.......... Keep distance at least 15 m.
.................. Avoid kickback.
.................. Wear a helmet, goggles and ear
protection.
.................. Wear protective gloves.
.................. Wear sturdy boots with nonslip soles.
Steeltoed safety boots are
recommended.
.................. Do not expose to moisture.
.................. Top permissible tool speed.
............. Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
IMPORTANT SAFETY
INSTRUCTIONS
GEB092-3
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
1. Guard (with screws)
2. Front grip
3. Clamping nut
4. Hex bolt
5. Shoulder strap
6. Nylon cord
7. Goggles
8. Red indicator
9. Button
10. Battery cartridge
11. Star marking
12. Lock-off button
13. Switch trigger
14. Indication lamp
15. Shaft
16. Grip
17. Nylon cutting head
18. Guard
19. Screws
20. Cutter cover 21. Nylon cord eyehole
22. Notch of the nylon cutting head
installation port
23. Spring
24. Spool holder
25. Retainer for nylon cord end
26. Spool
27. Hook
28. Motor housing
29. Lock button
Model AT-1826H
No load speed 7,800 min
-1
Overall length 1,229 mm - 1,433 mm
Cutting diameter with nylon cutting head 260 mm
Net weight 2.9 kg / 3.1 kg
Rated voltage D.C. 18 V
Standard battery cartridge(s)
Warning: Use only the battery cartridge(s) described.
AP-181 / AP-183
Cd
Ni-MH
Li-ion