4
11.01.21 en / 335A
Display (Run) - Modus
Input-Mode
Display inverted when the actual value is in failure state.
Measurement interrupted, relays are in failure state,
indicator LED orange color
No function
Chose Rel1, Rel2, T
a
, AC/DC and RUN
Chose parameter
Change and set response values for Rel1 and Rel2.
Reset fault memory:
Esc
Shift cursor to the left
Shift cursor to the right
Esc
For more the 3 sec, change to input mode
For more than 3 sec, change to display mode
After connecting the auxiliary supply A1/A2 the unit is in display (Run)
mode
:
The actual measured value is displayed continuously (AC or DC)
The display is inverted when a measured value is exceeds the settings..
With button
the fault memory is reset.
Pressing button
Esc
for more than 3 sec the unit changes to input mode.
In input mode the measurement is disabled, the relays are in failure mode
and the indicator LED is orange.
With the buttons
the different setting values can be chosen.
Move cursor position
One character to the right
Esc
One character to the left
Back to the Display (Run)-Mode
Press button
3 s
OK
New values stored
or
Press button
Esc
3 s;
Break Values unchanged
RUN
on the display confirm with
to change to display (Run) mode.
Ta
AC/DC
Rel2
Rel1
Esc 3s
Esc (Break) 3s
Break
(cancel changes)
OK-
(return with new settings)
(OK) 3s
Start up delay
Measuring principle
AC or DC
Input-mode
Display (Run) -
mode
Response value for Rel2
<U
RUN
U
AC [V]
DC [V]
M11096
Response value for Rel1
<U
>U
>U
Hysteresis
Hysteresis
A/R
A/R
Sp1
Sp2
t 1
v
t 2
v
Operating
