HELIX TWO Mk2 INSTALLATION & OPERATION GUIDE
15
DA-MAN-H2-003
www.dohmannaudio.com
For adjustments of a greater magnitude, press and hold either the top speed increase button or the bottom
speed decrease button for 5 seconds. The speed will either increase or decrease, depending on which button
you are pressing. When you are satisfied with the speed, do not press any buttons for 60 seconds. At this
point, the new calibrated speed will be stored in the turntable’s memory (ROM) and will be the new setting
from that moment onwards, even if the power is turned off.
Please note that the Helix Two is a ‘set and forget’ design, meaning it has been designed to hold its
performance parameters and not need adjusting, so it is very rare that a turntable will require any speed
adjustment but the functionality is there in the event that it’s needed.
Each Turntable has a Serial Number
Each Döhmann Audio Helix Mk2 turntable has a unique Serial Number that is recorded in the manufacturer’s
database along with all of the information pertaining to that specific unit. The Serial Number starts with a
“DA” and can be found on the turntable’s identification tag on the right side of the rear panel as shown in the
image above.
Register your Turntable
If you have purchased a new Döhmann Audio Helix turntable as the first owner, please register your turntable
on-line by visiting
www.dohmannaudio.com
, selecting ‘Support
Support
Support
Support’ or ‘Customer Care
Customer Care
Customer Care
Customer Care’ from the top menu, and
selecting ‘Warranty Registration
Warranty Registration
Warranty Registration
Warranty Registration’. Please take a moment to fill out the online form to ensure that your
turntable is registered in the Döhmann Audio Warranty Program.
