HELIX TWO Mk2 INSTALLATION & OPERATION GUIDE
10
DA-MAN-H2-003
www.dohmannaudio.com
STEP 8
STEP 8
STEP 8
STEP 8
Gently lower the platter to the bearing & feed the string through the rear portal on the side of the motor
spindle. Finish lowering the platter onto the bearing & pull the string with the two belts attached up and over
the motor spindle. Once the belts are in the motor spindle grooves, gently remove the string.
STEP
STEP
STEP
STEP 9
9
9
9
Unpack the external power supply and place the unit on the floor or on another shelf away from the turntable.
