DogWatch ProFence, Руководство пользователя

Страница: 12 / 24

10
Programmable Features
You can customize the receiver to one of 20 training settings, as outlined in the
chart on the right.
SETTING THE TRANSMITTER
Rates
The Transmitter Rate switch adjusts to three settings: (1 = slow, 2 = medium,
3 = fast). When your dog gets a correction, he receives it in a series of pulses per
second. Increasing the rate means that he will receive a greater number of pulses
per second. Rate 1 is the slowest pulse rate per second; 3 is the fastest.
Training Modes
The Training Mode switch allows you to choose between two
training options: Basic (Mode A) and QuickAlert
™
(Mode B). When in the Basic setting
your pet will receive an audible warning followed by a correction. For harder to train
dogs, when set to the QuickAlert mode, your pet will receive a very quick “alert”
correction followed by the normal audible warning and correction.
SETTING THE RECEIVER
Receiver Training Levels
Your receiver provides eight ‘training levels’ that allow
you to customize the receiver setting to your dog’s individual needs: Audible Only,
Level 1 (extra low), Level 2 (low), Level 3 (low medium), Level 4 (medium), Level 5
(medium high), Level 6 (high), and Level 7 (extra high). When the receiver is first
shipped from the manufacturer, it will automatically be set to Training Level 2 (low).
Changing the Receiver Settings
Your DogWatch Dealer will start the training on
the appropriate level according to your dog’s personality and traits. If you need to
change the training level on the receiver, hold the magnet on your ‘multi-tool’ to the
training level adjustment location on the side of the receiver (see below). Hold the
magnet steady and you will hear a series of beeps that indicate the current training
level. The “Audible Only” level is one long beep, Level 1 is one short beep, Level 2 is
two short beeps, Level 3 is three short beeps, etc. The training level will continue to
advance while the magnet is held in position. When you reach the desired setting,
pull the magnet away from the receiver. The receiver is now set.
Note:
Any time the magnet activates the receiver, the number of beeps will indicate
the current training level. As long as the magnet is held in place, it will advance the
receiver to the next training level and continue to cycle through the settings in the
order shown in the chart on Page 11.
Using the magnet to set the training
level on the R7m Receiver.
Using the magnet to set the training
level on the R9 Receiver.